background image

                                  
                                ________________________________________________ 

_________________________________________________________________ 
 

TOM Child Bed 

  

 

August 1999, 1

st

 Edition 

    if a child is in the bed, the lock must   
    be closed ! 
 

Lock 
closed

 

 

   

 

 

 
Assembly 

If need be, simple assembly tasks may be carried out by trained authorized persons. 
 

Function Check-up 

Prior to every new use of the child bed, a function check-up must be performed, i.e. 
whether all positions may be set up to the maximum positions and whether the 
positioning can be done easily.  
 

Positioning 

 
Back Part Positioning 
 

  Upwards 

By turning the hand wheel counter-clockwise, 
the backrest can be moved up. 

  Downwards 

By turning the hand wheel clockwise, the 
backrest can be moved down. (see figure) 
 

 

 
 
Setting Incline and Height of Bad Level 
 
Height 
Loosen the bar fixed in the cog-rack by 
pulling toward yourself (out of the cog-rack). 
Then set the required height by placing the 
bar in the same cog-rack position for both the 
head and legs. 
 
Incline
 
By fixing the bar in different positions of the 
cog-rack for head and leg parts, you can set 
various inclines of the bed level 
(Trendelenburg's / anti-Trendelenburg's 
position). 
 

 

 
 

Summary of Contents for TOM 115













Reviews: