Assembly the seat pole and seat,tight the seat pole by 3pcs screws,adjust the seat height by this quick release clamp.
Put the fuse into battery box before you use the scooter.
2. Charging the scooter
Finally fully charge your scooter before its first use. Charge it until the red light on the charger turns green. After it is finished charging remove the charger.
Charge your scooter after every use. Never let it go completely dead and never charge it for any longer than 24 hours.
Please note: When you turn they key to the on position after a full charge. All lights will be lit on the scooter’s throttle. Think of this like the battery level on a cell phone.
As your scooter’s battery level falls the lights on the throttle will go out. First the green light will go out, then the yellow, and finally you’ll be left with just the red light.
