M565Li OWNER’S/OPERATOR’S MANUAL
9. VEHICLE BREAK-IN PERIOD
46
The break-in period of your ATV: first 50 hours of operation.
No action on your part is as important as a proper engine break-in. Careful
break in of a new engine will result in more efficient performance and longer
engine life. Perform the following procedures carefully.
Do not operate at full throttle or high speeds for extended period of time
during break-in. Excessive heat can build up and cause damage to engine.
Please set a throttle limiter to half throttle during the break-in period.
1. Lock nut
2. Adjuster
1. Fill the fuel tank.
2. Check oil reservoir level indicated on dipstick. Add oil if necessary.
3. Warm up engine before you start. Drive slowly at first. Select an area which
is open and will give you room to familiarize yourself with ATV operation
and handling.
4. Vary the throttle positions. Do not idle the engine for excessively long periods of
time.
5. Perform regular checks of fluid levels, controls and all important areas on
the ATV as outlined in Daily pre-ride inspection checklist - see ”4. Daily pre-
ride inspection”.
6. Don’t pull loads or trailer during the break-in period.
7. Change oil and filter after break in.
Summary of Contents for M565L EURO IV
