Operating Instructions
Operating Instructions
3
8
TABLE OF CONTENTS
Package Contents
Panel Descriptions
Connecting and Operating
Maintenance
Product service
Warranty
Package Contents
①
Main unit .
②
Operating instructions.
③
12VDC power supply.(only for TX, RX can be powered from TX)
④
2xIR TX unit. (IR emitter cable, 1 pcs for TX, 1 pcs for RX)
⑤
2xIR RX unit. (IR receiver cable, 1 pcs for TX, 1pcs or for RX)
⑥
2 Phoenix plugs for RS232 cable termination
NOTE:
PART NUMBER (Abbreviation as P/N)
Connections and Operations
1) Connect the HDMI input source (such as HD-DVD, PS3, STB etc.) to TX.
2) Connect a CAT-5E/6E cable from UTP output of TX to UTP input of RX.
3) Connect the HDMI sink(such as HD-LCD
、
HD-DLP) to RX.
4) Connect the IR TX UNIT into TX IR-Out port; Connect the IR RX UNIT into
RX IR-In port.
5) Connect the IR RX UNIT into TX IR-In port; Connect the IR TX UNIT into RX
IR-Out port.
6) Phoenix RS232 Port can be set for firmware update or RS232 control signal
transmission (Default set for RS232).
Attention:
Please insert and extract cables gently.
Typical Application
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of
benzine to clean this unit.
PRODUCT SERVICE
（
1
）
Damage requiring service:
The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked change in
performance;
The unit has been dropped or the cabinet damaged.
（
2
）
Servicing Personnel:
Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing to
authorized servicing personnel.
（
3
）
Replacement parts:
When parts need replacing ensure the servicer
uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result in
fire, electric shock, or other Hazards.
（
4
）
Safety check:
After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or
workmanship, our Company (referred to as "the warrantor" ) will, for the
length of the period indicated as below,
(Parts(2)Year, Labor(90) Days)
which starts with the date of original purchase ("Limited Warranty period"), at
its option either(a) repair your product with new or refurbished parts, or (b)
