1. INTRODUCTION
This Model allows HDMI signals to be transmitted over a Single CAT5e/6 cable. This solution has the
added features of RS232 and 2-way IR control functionality over the same CAT5e/6 cable. It can
extend 4K@60Hz HDR 10 over a HDBaseT link and upto 40M ! The slimmest HDBaseT design,
making it perfect to mount behind ultra thin TVs.
2. APPLICATIONS
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
1
Main unit Transmitter & Receiver
2
Operating instructions
3
1xIR TX Cable
4
1xIR RX Cable
5
24V1A DC power supply
6
1x2 PIN Phoenix plugs for power
7
1x5 PIN Phoenix plugs for IR cable termination
8
2x3 PIN Phoenix plugs for RS232 cable termination
4. SYSTEM REQUIREMENTS
Input HDMI or VGA source equipment such as DVD/Blu-ray player/PC and HDMI
equipped output display (TV or monitor).
4
Operating Instruction
9 Firmware Upgarde
The unit support upgrade the firmware on line if needed.
1. Connect the USB to RS232 cable, connect via the RS232 port at the back side, Double click
UART.ISP.exe this upgrade tool.
2. Burn step:
①
Click”REFRESH”Serial port
②
Choose the port connect with the EW53
③
Set the baud rate at 115200
④
At the port side type A1, which mean upgrade the MCU program
⑤
Choose the MCU burn files in your PC
⑥
Click Update
⑦
Finish the upgrade
9
