7
Third Chapter
Machine installation
1
Unpacking
Check the host and accessories. Including the host, CD, power cable, remote
control, warranty card, manual.
2
Install the machine
Setting display unit :HD video multiplexers support 1 VGA and 1 HDMI output
synchronization, if you use HDMI input, set input signal to HDMI of the display
unit; if the user using a VGA port input, TV set to VGA.
output port with display unit is connected: completing placing the video
multiplexers, the signal output via HDMI cable or VGA cable docking with the
display unit
Input Signal Connection: Via HDMI cable ,VGA cable or video line connect the
computer or other signal source output devices with splitter input port
3
Power on
After finishing connecting the cables that we have talked above , insert the
100~240V AC power supply, turn the machine, the device is in working condition;
Chapter Four
Remote Control Description
After completion of the above hardware connection and turn on the power
switch, the display unit may also display no image, then we can through the
control software or an infrared remote control debug and settings. If you need
a small numbers display mode, we can set up the machine by remote control, this
chapter, we first explain our remote control.
