3
All repairs should be done by qualified service personnel , untrained Never attempt to
repair equipment. To prevent the risk of electric shock, do not open the cabinet.
9, Safety Precautions:
① the internal high-voltage equipment, non-professional maintenance personnel
shall not open the case, to avoid danger;
② non-dripping or splashing, prohibited place any container with liquid items on
the device;
③ for the prevention of fire,for biding a device near the fire;
④ for adequate ventilation, equipment should be maintained at least20CM void of
the front and rear panels;
⑤ devices should be immediately unplug the power cord and handled by
professional maintenance personnel such as eerie noise, smell or smoke;
⑥ In the case of lightning or unused for long periods, unplug the power cord;
⑦ not stuffed any object to ventilation holes of the device to avoid damage to the
equipment or electric shock;
⑧ not to place the device near water or other damp places;
⑨ the device should not be placed near heat sink or other high temperature places;
⑩ properly organize the power cord to prevent breakage;
⑪ the following conditions should unplug the device power cord, handled by
qualified service personnel:
1) the power cord is damaged or frayed;
2) When the liquid has been spilled into the device;
3) The device is dropped or the cabinet damaged;
4) This device malfunction or significant performance changes.
This device is not suitable for non-professionals to operate the debugger, users are
subject to professional training and guidance.
Please read carefully before using and this manual should be properly preserved for
later use.
