1
1 | Document Content
1.1 Function
This operating instructions manual provides necessary information on
installation, commissioning, safe operation, disassembly and disposal.
1.2 Target group: Authorised personnel
All operations described in this operating instructions manual may only
be performed by trained professional staff authorised by the operator.
Only install and commission the SmartLINK if you have read and un-
derstood the operating instructions manual and are familiar with the
applicable regulations.
1.3 Symbols and abbreviations used
Information, tip, note:
This symbol highlights helpful additional information
Caution:
Failure to comply with this warning can lead to disorders &
malfunctions.
Warning:
Failure to comply with this warning can damage the
SmartLINK.
Power supply
= PWR
Supply channel
= CHL
Extension/additional modules = EXT
Input
= IN
Output
= OUT
White
= WH
Yellow
= YE
Brown
= BN
Red
= RD
Blue
= BL
Green
= GN
Switch-on time
= ED
i
!
!
2
1.4 Proper Use
The products described here have been developed in order to ensure
functions as part of an overall system. It is the responsibility of the in-
staller to ensure the correct overall functioning.
It may be used only in accordance with the following versions or for
applications approved by the installer. Detailed information on the ap-
plication range can be found in the chapter „Product description“.
1.5 General notes on safety
The safety notes of the operating instructions manual and the country-
specific installation-, safety- and accident prevention regulations are
to be followed.
Residual risks are not known when observing the notes on safety and
the instructions relating to the installation, commissioning, operation
and maintenance.
1.6 Warning of misuse
In case of inappropriate or improper use or tampering, mal-
functions as well as risks, e.g. due to missing signal trans-
mission, can arise for people due to the use of the SmartLINK
cable transfer. Please follow the applicable standards / guidelines (DIN
EN, VdS) in this respect.
1.7 Disclaimer
For damages or malfunctions caused by incorrect installation or failu-
re to comply with this instruction manual, no liability is assumed. For
damages resulting from the use of spare parts or accessories not ap-
proved by the manufacturer, any further liability of the manufacturer is
excluded.
Any unauthorised repairs, modifications and additions are not permit-
ted for reasons of safety and exclude any liability of the manufacturer
for damages resulting from this.
