6
/
8
Examples
Point to point mode:
To put two devices work in point to point mode, we need to set the
destination MAC of the pair to be the MAC of the other device (use ATHA
command). DN of the two devices can be set to 0xFFFFFFFFFFFF, or the
domain part of DN of source be same as the domain part of destination
SN.
Broadcast mode:
To put the device into broadcast mode, MAC addresses of all the devices
must be set to broadcast mode (FF-FF-FF-FF-FF-FF). If DN of all devices
also set to (0xFFFFFFFFFFFF), all devices are in broadcasting mode.
Otherwise, it only broadcasts within the same domain where the DN of
the source is same with the DN of the destination’s SN.
