33
Advanced Wireless-N Router
Linksys E2000
Chapter 3: Advanced Configuration
Enter a Name
Enter any name to indicate the name of
the entry .
Port Range
Enter the port range that the game will be
using . You can have up to three ranges to define for this
bandwidth allocation . Port numbers can range from 1 to
65535 . Check your application’s documentation for details
on the service ports used .
Select the protocol
TCP
or
UDP
, or select
Both
.
Priority
Select the appropriate priority:
High
,
Medium
(Recommended)
,
Normal
, or
Low
.
Click
Add
to save your changes . Your new entry will appear
in the Summary list .
MAC Address
QoS > MAC Address
The MAC address of the computer you are using is
displayed .
Enter a Name
Enter a name for your device .
MAC Address
Enter the MAC address of your device .
Priority
Select the appropriate priority:
High
,
Medium
(Recommended)
,
Normal
, or
Low
.
Click
Add
to save your changes . Your new entry will appear
in the Summary list .
Voice Device
QoS > Voice Device
Enter a Name
Enter a name for your voice device .
MAC Address
Enter the MAC address of your voice
device .
Priority
Select
the
appropriate
priority:
High
(Recommended)
,
Medium
,
Normal
, or
Low
.
Click
Add
to save your changes . Your new entry will appear
in the Summary list .
Summary
This lists the QoS entries you have created for your
applications and devices .
Priority
This column displays the bandwidth priority of
High, Medium, Normal, or Low .
Name
This column displays the application, game,
device, or port name .
Information
This column displays the port range or
MAC address entered for your entry . If a pre-configured
application or game was selected, there will be no valid
entry shown in this section .
Remove
Click this option to remove an entry .
Edit
Click this option to make changes .
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to clear your changes .
Administration > Management
The
Management
screen allows the network’s
administrator to manage specific Router functions for
access and security .
Administration > Management
Management
To ensure the Router’s security, you will be asked for your
password when you access the Router’s browser-based
utility . The default is
admin
.
Router Password
Enter a new password for the Router .
Re-enter to confirm
Enter the password again to confirm .
Web Access
Web Utility Access
HTTP (HyperText Transport Protocol)
is the communications protocol used to connect to servers
on the World Wide Web . HTTPS uses SSL (Secured Socket
Layer) to encrypt data transmitted for higher security .
Select
HTTP
or
HTTPS
. The default is
HTTP
.
