Linksys E2000 User Manual Download

Page: 47 / 59

Linksys E2000

Appendix E: Software End User License Agreement

Advanced Wireless-N Router

In addition, Cisco may collect and store detailed

information regarding Your network configuration

and usage for the purpose of providing You technical

networking support . The information is associated with

You only when You provide a unique ID number to the

support representative while You are receiving help . The

unique ID is generated randomly on Your computer upon

installation and is completely under Your control .
EXCEPT AS OTHERWISE PROVIDED FOR IN THIS

AGREEMENT, CISCO HAS NO OBLIGATION OF

CONFIDENTIALITY OR (EXCEPT TO THE EXTENT REQUIRED

BY THE APPLICABLE DATA PROTECTION LAWS) PRIVACY OF

ANY COMMUNICATION OR INFORMATION TRANSMITTED

USING THE TECHNOLOGY . Cisco will not be liable for the

privacy of e-mail addresses, registration and identification

information, disk space, communications, confidential

or trade-secret information stored on equipment,

transmitted over networks accessed by the Technology,

or otherwise connected with Your use of the Technology .
Your use of Your Cisco product and/or the Technology

constitutes consent by You to Cisco’s and/or its affiliates’

collection and use of such information and, for Canadian

or European Economic Area (EEA) customers, to the

transfer of such information to a location outside

Canada or the EEA . Any information collected by Your

Cisco product and/or the Software is done and utilized

in accordance with our Privacy Policy available at

http://www.myciscohome.com/privacy

. Your election

to use the Cisco product and/or Technology indicates Your

acceptance and consent to Cisco’s use of Your personal

data in accordance with the terms of the Cisco Privacy

Policy, so please review the policy carefully and check the

web site above to review updates to it .

Support; Equipment.

This Agreement does not entitle

You to any support, upgrades, patches, enhancements,

or fixes (collectively, “Support”) for the Technology . Any

such Support for the Technology that may be made

available by Cisco, in its sole discretion, shall become

part of the Technology and subject to this Agreement .

You shall be responsible for obtaining and maintaining

any equipment or ancillary services needed to connect

to, access, or otherwise use the Technology, including,

without limitation, modems, hardware, software, and

long distance or local telephone service . You shall be

responsible for ensuring that such equipment or ancillary

services are compatible with the Technology .

Software Upgrades etc.

If the Software enables You to

receive Upgrades, You may elect at any time to receive

these Upgrades either automatically or manually . If You

elect to receive Upgrades manually or You otherwise

elect not to receive or be notified of any Upgrades, You

may expose Your Cisco product and/or the Software to

serious security threats and/or some features within Your

Cisco product and/or Software may become inaccessible .

There may be circumstances where we apply an Upgrade

automatically in order to comply with changes in

legislation, legal, security or regulatory requirements or

as a result of requirements to comply with the terms of

any agreements Cisco has with any third parties regarding

Your Cisco product and/or the Software . You will always

be notified of any Upgrades being delivered to You . In

addition, Cisco reserves the right to Upgrade our user

interface with or without notice to You . The terms of this

license will apply to any such Upgrade unless the Upgrade

in question is accompanied by a separate license, in which

event the terms of that license will apply .

Term and Termination.

You may terminate this License

at any time by destroying all copies of the Software

and documentation . Your rights under this License will

terminate immediately without notice from Cisco if You

fail to comply with any provision of this Agreement .

Limited Warranty.

Cisco additionally warrants that any

media on which the Software may be provided will be

free from defects in materials and workmanship under

normal use for a period of ninety (90) days from the date

of original purchase . Your exclusive remedy and Cisco’s

entire liability under this limited warranty will be for Cisco,

at its option, to (a) replace the Software media, or (b)

refund the purchase price of the Software media .
EXCEPT FOR THE WRITTEN LIMITED WARRANTY ON

MEDIA SET FORTH ABOVE AND PROVIDED IN YOUR

CISCO PRODUCT PACKAGING WITH THE PURCHASE OF

THE RELEVANT CISCO PRODUCT AND TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE LAW, ALL SOFTWARE

AND SERVICES PROVIDED BY CISCO ARE PROVIDED “AS

IS” WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY

KIND . Without limiting the foregoing, Cisco does not

warrant that the operation of the product, software or

services will be uninterrupted, bug free or error free . Also,

due to the continual development of new techniques for

intruding upon and attacking networks, Cisco does not

warrant that the product, software or services, or any

equipment, system or network on which the product,

software or services are used will be free of vulnerability

to intrusion or attack . The product may include or be

bundled with third party software or service offerings .

This limited warranty shall not apply to such third party

software or service offerings . This limited warranty does

not guarantee any continued availability of a third party’s

service for which this product’s use or operation may

require .
CISCO DOES NOT AND CANNOT WARRANT THE RESULTS

YOU MAY OBTAIN BY USING THE TECHNOLOGY . THIS

SECTION CONSTITUTES AN ESSENTIAL PART OF THE

AGREEMENT, AND THE FOREGOING DISCLAIMERS ALSO

APPLY WITH RESPECT TO CISCO, THEIR DISTRIBUTORS,

CONTRACTORS AND AGENTS . Further, Cisco has no

special relationship with or fiduciary duty to You . You

acknowledge that Cisco has no control over, and no duty

to take any action regarding: which users gain access to

the Technology . The Technology may contain, or enable

You to access, information that some people may find

Summary of Contents for E2000




























































Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands

Linksys E2000, User Manual

Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands