Linksys Voice System Administration Guide
162
Voice tab
SIP T2
RFC 3261 T2 value (maximum retransmit interval for non-INVITE
requests and INVITE responses), which can range from 0 to 64 seconds.
Default:
4
SIP T4
RFC 3261 T4 value (maximum duration a message remains in the
network), which can range from 0 to 64 seconds.
Default:
5
SIP Timer B
RFC 3261 INVITE transaction time-out value, which can range from 0 to
64 seconds.
Default:
32
SIP Timer F
RFC 3261 Non-INVITE transaction
time-out value, which can range from
0 to 64 seconds.
Default:
32
SIP Timer H
RFC 3261 time-out value for ACK receipt, which can range from 0 to 64
seconds.
Default:
32
SIP Timer D
RFC 3261 wait time for response retransmits, which can range from 0 to
64 seconds.
Default:
32
SIP Timer J
RFC 3261 wait time for Non-INVITE response hang-around time, which
can range from 0 to 64 seconds.
Default:
32
INVITE Expires
INVITE request Expires header value. If you enter 0, the Expires header is
not included in the request. Range: 0–(2
31
–1).
Default:
240
ReINVITE Expires
ReINVITE request Expires header value. If you enter 0, the Expires header
is not included in the request. Range: 0–(2
31
–1).
Default:
30
Reg Min Expires
Minimum registration expiration time allowed from the proxy in the
Expires header or as a Contact header parameter. If the proxy returns a
value less than this setting, the minimum value is used.
Default:
1
Reg Max Expires
Maximum registration expiration time allowed from the proxy in the
Min-Expires header. If the value is larger than this setting, the maximum
value is used.
Default:
7200
Reg Retry Intvl
Interval to wait before the SPA9000 retries registration after failing
during the last registration.
Default:
30
Reg Retry Long Intvl
When registration fails with a SIP response code that does not
match<Retry Reg RSC>, the SPA9000 waits for the specified length of
time before retrying. If this interval is 0, the SPA9000 stops trying. This
value should be much larger than the Reg Retry Intvl value, which
should not be 0.
Default:
1200
Reg Retry Random Delay
Random delay range (in seconds) to add to <Register Retry Intvl> when
retrying REGISTER after a failure.
Default:
0
(disabled)
Summary of Contents for Linksys SPA9000
Page 245: ...Linksys Voice System Administration Guide 243 ...
Page 246: ...080322NC LB ...
