manualshive.com logo in svg

Linksys Linksys SPA9000, Administration Manual

The Cisco Linksys SPA9000 is an advanced communication system designed for small businesses. Ensure smooth operation with the Administration Manual, available for free download from 88.208.23.73:8080. This comprehensive manual covers setup, troubleshooting, and customization, empowering users to harness the full potential of this powerful product.

Share
Download
background image

Linksys Voice System Administration Guide

215

Obtaining Warranty Service

TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST 
DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR 
PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE), 
ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT (INCLUDING 
ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
IN NO EVENT WILL LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. 
The foregoing limitations will apply even if any warranty or remedy provided under this limited 
warranty fails of its essential purpose. Some jurisdictions do not allow the exclusion or 
limitation of incidental or consequential damages, so the above limitation or exclusion may not 
apply to you. 

Obtaining Warranty Service 

If you have a question about your product or experience a problem with it, please go to 
www.linksys.com/support where you will find a variety of online support tools and information 
to assist you with your product. If the product proves defective during the Warranty Period, 
contact the Value Added Reseller (VAR) from whom you purchased the product or Linksys 
Technical Support for instructions on how to obtain warranty service. The telephone number 
for Linksys Technical Support in your area can be found in the product User Guide and at 
www.linksys.com. Have your product serial number and proof of purchase on hand when 
calling. A DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED TO PROCESS WARRANTY 
CLAIMS. If you are requested to return your product, you will be given a Return Materials 
Authorization (RMA) number. You are responsible for properly packaging and shipping your 
product to Linksys at your cost and risk. You must include the RMA number and a copy of your 
dated proof of original purchase when returning your product. Products received without a 
RMA number and dated proof of original purchase will be rejected. Do not include any other 
items with the product you are returning to Linksys. Defective product covered by this limited 
warranty will be repaired or replaced and returned to you without charge. Customers outside of 
the United States of America and Canada are responsible for all shipping and handling charges, 
custom duties, VAT and other associated taxes and charges. Repairs or replacements not 
covered under this limited warranty will be subject to charge at Linksys’ then-current rates. 

Technical Support 

This limited warranty is neither a service nor a support contract. Information about Linksys’ 
current technical support offerings and policies (including any fees for support services) can be 
found at: www.linksys.com/support. This limited warranty is governed by the laws of the 
jurisdiction in which the Product was purchased by you. Please direct all inquiries to: Linksys, 
P.O. Box 18558, Irvine, CA 92623

Summary of Contents for Linksys SPA9000























































































































































































































































Reviews:

No comments

Related manuals for Linksys SPA9000

UNICOM PoE Injector Adapter POE-32001T Specifications preview
PoE Injector Adapter POE-32001T
Brand: UNICOM Pages: 1
Baby Jogger Pram Instructions Manual preview
Pram
Brand: Baby Jogger Pages: 12
Black Box IS425A Manual preview
IS425A
Brand: Black Box Pages: 107
Qlogic SANblade 2300 Series Quick Start Manual preview
SANblade 2300 Series
Brand: Qlogic Pages: 12
Linksys WUSB6300 User Manual preview
WUSB6300
Brand: Linksys Pages: 343
C2G 81930 Manual preview
81930
Brand: C2G Pages: 24
StarTech.com SP122DP2DVI Instruction Manual preview
SP122DP2DVI
Brand: StarTech.com Pages: 2
Proxim RangeLAN2 7401 Manual preview
RangeLAN2 7401
Brand: Proxim Pages: 101
B.E.G. LUXOMAT IR-RC-Adapter Quick Start Manual preview
LUXOMAT IR-RC-Adapter
Brand: B.E.G. Pages: 4
Blus PE3B User Manual preview
PE3B
Brand: Blus Pages: 8
Goobay 62104 User Manual preview
62104
Brand: Goobay Pages: 5
NETGEAR GA511 - Gigabit Ethernet PC Card User Manual preview
GA511 - Gigabit Ethernet PC Card
Brand: NETGEAR Pages: 50
TP-Link TL-PA211 Quick Installation Manual preview
TL-PA211
Brand: TP-Link Pages: 75
D-Link WL-211F User Manual preview
WL-211F
Brand: D-Link Pages: 22
peplink PEPWAVE MAX Adapter User Manual preview
PEPWAVE MAX Adapter
Brand: peplink Pages: 20
StarTech.com DK30C2HAGPD Quick Start Manual preview
DK30C2HAGPD
Brand: StarTech.com Pages: 2
Tripp Lite U244-001-HDMI-R Owner'S Manual preview
U244-001-HDMI-R
Brand: Tripp Lite Pages: 12
Bluetake Technology BT007Si User Manual preview
BT007Si
Brand: Bluetake Technology Pages: 30

Brands by name

Popular brands

Load more brands