manualshive.com logo in svg

Linksys Linksys SPA9000, Administration Manual

The Cisco Linksys SPA9000 is an advanced communication system designed for small businesses. Ensure smooth operation with the Administration Manual, available for free download from 88.208.23.73:8080. This comprehensive manual covers setup, troubleshooting, and customization, empowering users to harness the full potential of this powerful product.

Share
Download
background image

Linksys Voice System Administration Guide

233

Software Licenses:

7.

 If, as a consequence of a court judgment or allegation of patent infringement or for any other 

reason (not limited to patent issues), conditions are imposed on you (whether by court order, 
agreement or otherwise) that contradict the conditions of this License, they do not excuse you 
from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your 
obligations under this License and any other pertinent obligations, then as a consequence you 
may not distribute the Program at all. For example, if a patent license would not permit royalty-
free redistribution of the Program by all those who receive copies directly or indirectly through 
you, then the only way you could satisfy both it and this License would be to refrain entirely 
from distribution of the Program. 

If any portion of this section is held invalid or unenforceable under any particular circumstance, 
the balance of the section is intended to apply and the section as a whole is intended to apply 
in other circumstances. 

It is not the purpose of this section to induce you to infringe any patents or other property right 
claims or to contest validity of any such claims; this section has the sole purpose of protecting 
the integrity of the free software distribution system, which is implemented by public license 
practices. Many people have made generous contributions to the wide range of software 
distributed through that system in reliance on consistent application of that system; it is up to 
the author/donor to decide if he or she is willing to distribute software through any other 
system and a licensee cannot impose that choice. 

This section is intended to make thoroughly clear what is believed to be a consequence of the 
rest of this License. 

8.

 If the distribution and/or use of the Program is restricted in certain countries either by 

patents or by copyrighted interfaces, the original copyright holder who places the Program 
under this License may add an explicit geographical distribution limitation excluding those 
countries, so that distribution is permitted only in or among countries not thus excluded. In 
such case, this License incorporates the limitation as if written in the body of this License. 

9.

 The Free Software Foundation may publish revised and/or new versions of the General Public 

License from time to time. Such new versions will be similar in spirit to the present version, but 
may differ in detail to address new problems or concerns. 

Each version is given a distinguishing version number. If the Program specifies a version 
number of this License which applies to it and "any later version", you have the option of 
following the terms and conditions either of that version or of any later version published by 
the Free Software Foundation. If the Program does not specify a version number of this License, 
you may choose any version ever published by the Free Software Foundation. 

10.

 If you wish to incorporate parts of the Program into other free programs whose distribution 

conditions are different, write to the author to ask for permission. For software which is 
copyrighted by the Free Software Foundation, write to the Free Software Foundation; we 
sometimes make exceptions for this. Our decision will be guided by the two goals of preserving 
the free status of all derivatives of our free software and of promoting the sharing and reuse of 
software generally. 

NO WARRANTY

11. 

BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE 

PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE 

Summary of Contents for Linksys SPA9000























































































































































































































































Reviews:

No comments

Related manuals for Linksys SPA9000

Hama W11 Operating Instructions preview
W11
Brand: Hama Pages: 4
Hama PS-100 Bluetooth Printer Adapter Operating Instruction preview
PS-100 Bluetooth Printer Adapter
Brand: Hama Pages: 8
Hama Nano-Bluetooth-USB-Adapter Operating Instruction preview
Nano-Bluetooth-USB-Adapter
Brand: Hama Pages: 34
Hama 53173 Operating Instructions Manual preview
53173
Brand: Hama Pages: 36
Hama 53160 Operating Instruction preview
53160
Brand: Hama Pages: 22
Hama 53150 Operating Instructions Manual preview
53150
Brand: Hama Pages: 12
Hama Powerline LAN Set Operating Instruction preview
Powerline LAN Set
Brand: Hama Pages: 28
Hama 53137 Operating Instructions Manual preview
53137
Brand: Hama Pages: 40
Hama USB 2.0 Fast Ethernet Adapter Operating Instruction preview
USB 2.0 Fast Ethernet Adapter
Brand: Hama Pages: 7
Hama Nano Bluetooth USB Adapter Operating Instruction preview
Nano Bluetooth USB Adapter
Brand: Hama Pages: 16
Nextech NT-BT100 Manual preview
NT-BT100
Brand: Nextech Pages: 7
Xantrex Freedom SW 2000 Owner'S Manual preview
Freedom SW 2000
Brand: Xantrex Pages: 36
C4Line CrossPower C4L5200-ETH Manual preview
CrossPower C4L5200-ETH
Brand: C4Line Pages: 26
Aiphone RY-IP44 Programming Manual preview
RY-IP44
Brand: Aiphone Pages: 15
Harman harman/kardon CITATION ADAPT Owner'S Manual preview
harman/kardon CITATION ADAPT
Brand: Harman Pages: 31
i-tec C31METAL25LAN User Manual preview
C31METAL25LAN
Brand: i-tec Pages: 32
NETGEAR WNDA3200 User Manual preview
WNDA3200
Brand: NETGEAR Pages: 18
Jabra LINK 280 - Software Manual preview
LINK 280 -
Brand: Jabra Pages: 3

Brands by name

Popular brands

Load more brands