Linksys Voice System Administration Guide
58
Configuring Dial Plans
Configuring Phone Lines and Calling Routing Behavior
Note
Separate each digit sequence with a pipe character, and enclose the
entire set of digit sequences within parentheses. Refer to the following
example:
(9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)
5. Click
Submit All Changes
. The phones reboot.
6. Verify that you can successfully complete a call using each digit sequence that you entered
in the dial plan.
Note
If you hear a reorder (fast busy) tone, you need to review your entries
and modify the dial plan appropriately. See
”Digit Sequences,” on
page 53
.
Entering a Phone Dial Plan
The phone dial plan is automatically updated when the system phone dial plan is modified.
There are special cases where it is required to enter the phone dial plan directly on the phone.
Follow the procedure below to enter a dial plan for a particular extension on a client station in
the following cases:
•
The phone is outside the SPA9000 multicast domain (e.g. when the phone is connected
to the SPA9000 via a VPN connection).
•
For additional extensions on an existing phone (the system wide phone dial plan is
propagated only to extension 1 of all phones).
1. Connect to the SPA9000 administration web server, and choose Admin access with
Advanced settings. (See
”Connecting to the SPA9000 Administration Web Server,” on
page 24
.)
2. Click the
PBX Status
link near the top right corner or lower left corner of the page, to view
the list of client stations.
3. Click the hyperlink in the
IP Address
column for the first phone that you want to configure.
The telephone configuration page appears in a separate browser window.
4. Click the
Ext 1
tab, or the tab for the extension that you want to configure.
5. Scroll down to the
Dial Plan
section.
6. Enter the digit sequences in the
Dial Plan
field.
NOTE:
•
The default (US-based) system-wide dial plan appears automatically in the field. You can
delete digit sequences, add digit sequences, or replace the entire dial plan with a new
Summary of Contents for Linksys SPA9000
Page 245: ...Linksys Voice System Administration Guide 243 ...
Page 246: ...080322NC LB ...
