background image

46

Appendix A: Troubleshooting
Common Problems and Solutions

Broadband Router with 2 Phone Ports

Check “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on 
getting an IP address.

F. Check the 

Enable

 option for the port services you want to use. Consider the examples below:

When you have completed the configuration, click the 

Save Settings

 button.

12. I can’t get the Internet game, server, or application to work.

If you are having difficulties getting any Internet game, server, or application to function properly, consider 
exposing one PC to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available when an 
application requires too many ports or when you are not sure which port services to use. Make sure you 
disable all the forwarding entries if you want to successfully use DMZ hosting, since forwarding has priority 
over DMZ hosting. (In other words, data that enters the Router will be checked first by the forwarding 
settings. If the port number that the data enters from does not have port forwarding, then the Router will send 
the data to whichever PC or network device you set for DMZ hosting.)  Follow these steps to set DMZ hosting:

A. Access the Router’s Web-based Utility by going to 

http://192.168.15.1

 or the IP address of the Router. Go 

to the 

Applications & Gaming

 => 

Port Range Forward

 tab.

B. Disable or remove the entries you have entered for forwarding. Keep this information in case you want to 

use it at a later time.

C. Click the 

DMZ

 tab.

D. Enter the Ethernet adapter’s IP address of the computer you want exposed to the Internet.  This will 

bypass the NAT security for that computer. Please refer to “Appendix C: Finding the MAC Address and IP 
Address for Your Ethernet Adapter” for details on getting an IP address. 

Once completed with the configuration, click the 

Save Settings

 button.

13. I forgot my password, or the password prompt always appears when saving settings to the Router.

Reset the Router to factory default by pressing the Reset button for 30 seconds and then releasing it. If you 
are still getting prompted for a password when saving settings, then perform the following steps:

Application

Start and End

Protocol

IP Address

Enable

UT

7777 to 27900

Both

192.168.15.100

X

Halflife

27015 to 27015

Both

192.168.15.105

X

PC Anywhere

5631 to 5631

UDP

192.168.15.102

X

VPN IPSEC

500 to 500

UDP

192.168.15.100

X

Summary of Contents for RT41P2-AT - Broadband Router With 2 Phone Ports At&t Service Req








































































Reviews: