10/100 USB Network Adapter
14
6. After ensuring that all of the listed network
components are installed on your system, in
the Primary Network Logon box select
Client for Microsoft Networks.
7. Click on the Identification tab. Type the name of your computer in the
Computer Name box. Choose a name that is unique from the other com-
puter names on the network.
8. Type
the
name of your workgroup in the Workgroup box. The
Workgroup name should be the same Workgroup Name in use by all of
the other PCs on the network. Do NOT click OK when you are done.
9. Enter
a
description of your computer in the Computer Description box.
This box is optional, and can be left blank.
N
No
otte
e:: Your Computer and
Workgroup Names must both
be fewer than 15 characters,
and should only consist only
of numbers and letters.
Linksys EtherFast
®
Series
13
3. Click
the
File and Print Sharing button. The File and Print Sharing win-
dow will appear.
4. If you'd like others to be able to access the files on your PC's hard drive,
select I want to be able to give others access to my files.
If you'd like to share your printer with other
users on the network, select I want to be able
to allow others to print to my printer.
5. Click
the
OK button.
File and Printer Sharing
for Microsoft Networks should now appear in the list of installed compo-
nents.
N
No
otte
e:: If you do not enable
File and Print Sharing, your
PC will be invisible on the
network and inaccessible
to other users.
