13. A Logon window will appear, requiring you to enter a User name and
Password. Make up a user name and password (if you haven’t already)
and click OK. Do not click the Cancel button or Escape [ESC] key.
Clicking either of these buttons will prevent you from logging into the
network. If the logon does not appear or if it does not allow you to log on,
refer to the Troubleshooting section.
14. Once you are at the Windows Millennium desktop, double-click on the
Network Neighborhood icon. You should see one icon for the entire net-
work and the names of the other PCs on the network.
• If you can see your computer along with all the other computers on
the network in Network Neighborhood, then the Windows
Millennium network configuration is complete. Continue with
Sharing Your Files and Printers in Windows on the next page if you
want data from your PC to be available to others on the network.
You may stop here, however, if you wish to configure File and Print
Sharing at a later time.
• If you don't see anything at all in Network Neighborhood, press the F5
key on your keyboard a few times to refresh the screen. If that doesn’t
work, go to the Troubleshooting section.
• If you only see your own computer in Network Neighborhood, skip to
the Troubleshooting section.
• If you see all computers on the network except yours, press the F5 key
a few times. If, after a minute or so, you still can’t see your own PC,
see the Troubleshooting section.
• If you only see computers that are running the same operating system
as you and you don’t see any others, go to the Troubleshooting section.
10/100 USB Network Adapter
26
25
10. Optional: Choose the Access Control tab. Make sure that Shared-level
access control is selected. If the setting is on User-Level access control
and you can’t change it, skip to the Troubleshooting section.
11. Click the OK button. Your system may or may not ask you for your
Windows Millennium CD-ROM or the location of the Windows
Millennium installation files. If it does, direct Windows to the appropriate
location, (i.e.,
D:\winME
if you have the Windows Millennium CD-
ROM, where D: represents your CD-ROM drive, or
C:\windows\options\cabs
).
12. Once Windows has copied the necessary files, the System Settings
Change window appears. Remove all disks from your PC and click Yes to
restart your PC. If you don't see this window, simply shut down Windows
Millennium and restart your PC. Remember to remove the Driver Disk
from the floppy drive prior to rebooting.
Linksys EtherFast
®
Series
