10/100 USB Network Adapter
6. The Driver File Search Results dialog box will appear. Click Next.
7.
The Completing the Found New Hardware Wizard dialog box will appear.
The following adapter name will be shown: Linksys EtherFast 10/100
USB Network Adapter. Click Finish.
8.
Remove the Driver Disk from the floppy drive.
The EtherFast 10/100 USB Network Adapter driver installation is com-
plete. For more information about networking under Windows 2000,
refer to your Microsoft Windows 2000 documentation.
32
Troubleshooting
1. Windows doesn't detect new hardware with the EtherFast 10/100 USB
Network Adapter hardware installed, or it continues to detect the adapter each
time I restart the PC.
• You might not have correctly or securely installed the adapter into your
computer. Check that the adapter is securely inserted into the appropriate
slot.
• The system BIOS might not be USB compatible, your PCs USB settings
may not be enabled, or the motherboard may have USB options not sup-
ported by Windows 98, Millennium, or 2000. If you are not sure, contact
your PCs manufacturer.
2. Windows can't locate the driver for the EtherFast 10/100 USB Network
Adapter.
• You may have inserted the wrong diskette into your PCs drive.
• The diskette may be defective or files may be missing, or you may be
pointing Windows to the wrong drive. Ensure that the driver disk includes
the files “USB100TX.inf ” and “USB100TX.sys”.
3. The Windows Logon screen doesn't appear after restarting the computer.
• Click on Start, then Log Off. Log back in. If this doesn't solve the prob-
lem, your PCs manufacturer may have disabled Windows' networking.
Contact your computer's manufacturer for help. If using Windows 2000,
refer to your Microsoft documentation.
4. On the Access Control Tab, User Level Access is selected, but Shared Level
Access is grayed out and not accessible.
• You previously had your primary network logon set to Client for NetWare
Networks. On the Configuration tab of the Network Properties window,
ensure that your primary network logon is set to Client for Microsoft
Networks.
• Your personal web server PC or Microsoft Front Page may require you to
choose a user level for security reasons.
Linksys EtherFast
®
Series
31
