33
Chapter 6: Configuring the Wireless-G Access Point
The Wireless - Wireless Security Tab
Wireless-G Access Point
RADIUS
This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS
server is connected to the Access Point.)
RADIUS Server
. Enter the RADIUS server’s IP address.
RADIUS Port
. Enter the port number used by the RADIUS server.
Shared Secret
. Enter the Shared Secret key used by the Access Point and RADIUS server.
Encryption
. Select a level of WEP encryption,
40/64 bits (10 hex digits)
or
128 bits (26 hex digits)
.
Passphrase
. To generate WEP keys using a Passphrase, enter the Passphrase and click the
Generate
key.
Key 1-4
. If you want to manually enter WEP keys, then complete the fields provided. Each WEP key can consist of
the letters “A” through “F” and the numbers “0” through “9”. It should be 10 characters in length for 64-bit
encryption or 26 characters in length for 128-bit encryption.
TX Key
. Select which Key to use for data transmissions.
Change these settings as described here and click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes. Click
Help
for more information.
WEP
Encryption
. Select a level of WEP encryption,
40/64 bits (10 hex digits)
or
128 bits (26 hex digits)
.
Passphrase
. To generate WEP keys using a Passphrase, enter the Passphrase and click the
Generate
key.
Key 1-4
. If you want to manually enter WEP keys, then complete the fields provided. Each WEP key can consist of
the letters “A” through “F” and the numbers “0” through “9”. It should be 10 characters in length for 64-bit
encryption or 26 characters in length for 128-bit encryption.
TX Key
. Select which Key to use for data transmissions.
Change these settings as described here and click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes. Click
Help
for more information.
Figure 6-17: Wireless Security - RADIUS Screen
Figure 6-18: Wireless Security - WEP Screen
