4
F
Make sure the Access Point’s
Power, Act, and Link LEDs are lit.
If they are not, check the
cable connections. Click Next.
G
The Setup Wizard will search for
the Access Point within your
network and display a list of all
access points. If more than
one are displayed, select the
Access Point by clicking on it.
Then click Yes to change its
settings.
H
You will be asked to sign onto
the Access Point you have
selected. Enter the default
password, admin. Then click
Enter.
I
Enter a descriptive name in the
Device Name
field and then
create a new password.
If your network router will
automatically assign an IP
address to the Access Point,
then select Automatic-DHCP.
If you want to assign a fixed IP
address to the Access Point,
then select Static IP. Enter an IP
Address, Subnet Mask, and the
IP address of your network
gateway (usually your router).
Then click Next.
F
G
I
H
