20
Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet
The Wireless - Wireless Network Access Tab
Wireless-G Access Point with Power Over Ethernet
The Wireless - Wireless Network Access Tab
This screen allows you to permit or block wireless access for computers with specific MAC addresses.
Wireless Network Access
You can allow or block access for the MAC addresses you have entered.
Access List
. To permit access, click
Permit to access
. To deny access, click
Prevent from accessing
. If you do
not wish to filter users by MAC address, select
Disabled
.
MAC 1-20
. Enter the MAC addresses of the computers whose access you want to control.
Select MAC Address from Networked Computers
. If you want to select a MAC address from a list, click this
button. The MAC addresses for your computers will be automatically displayed. Click the checkboxes of the MAC
addresses you want to add to your access list. Change these settings as described here and click
Apply
to apply
your changes. Click
Refresh
to retrieve the latest MAC addresses. Click
Close
to close this screen and return to
the
Wireless Network Access
screen.
Change these settings as described here and click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes. Click
Help
for more information.
Figure 5-9: Wireless - Wireless Network Access Screen
mac address:
the unique address that a manufacturer
assigns to each networking device.
Figure 5-10: Select MAC Address Screen
