3
2
A
Power off your desktop PC and
unplug it.
B
Open your PC case and
locate an available PCI slot on
the motherboard. Check with
your computer manufacturer
for instructions.
C
Slide the Adapter into the PCI
slot. Make sure that all of its
pins are touching the slot’s
contacts. You may have to
apply a bit of pressure to slide
the Adapter all the way in.
D
After the Adapter is firmly in
place, secure its fastening tab
to your PC’s chassis with a
mounting screw.
E
Close your PC and plug it back
into the electrical outlet.
F
Attach the external antenna to
the Adapter’s antenna ports.
Bend the antennas so that they
make a V or L shape.
G
Power on your desktop PC.
Proceed to Step 3.
Connecting the
Adapter Installation
Connect the Adapter
Example
Adapter
IMPORTANT:
During installation of the Adapter, follow these guidelines:
•
Make sure that you are free of any static electricity. If necessary, touch the
metal case of your computer before you install the Adapter.
•
Do not use a magnetic screwdriver.
•
Do not touch the contact points of the computer or the Adapter. (The computer’s
contact points are deep inside its PCI slot. The Adapter’s contact points are the
short gold strips on the edge that will fit into the computer’s PCI slot.)
