7
Setting Up the Adapter with
Manual Setup
Click
Manual Setup
on the
Available
Wireless Network
screen to set up
the Adapter manually.
A
If your network has a router or
other DHCP server, click
Obtain
network settings
automatically (DHCP)
.
If your network does not have a
DHCP server, click
Specify
network settings
. You must
specify the IP Address and
Subnet Mask on this screen. If
you are unsure about the
Default Gateway and DNS
addresses, leave those blank.
IP Address
- This must be
unique to your network.
Subnet Mask
- The Adapter’s
Subnet Mask must match your
wired network’s Subnet Mask.
Default Gateway
- Enter the IP
address of your network’s
Gateway here.
DNS 1
and
DNS 2
- Enter the
DNS address(es) of your wired
Ethernet network here.
Click
Next
.
A
