2
1
A
Insert the Setup Wizard CD-ROM
into your CD-ROM drive. The Setup
Wizard should run automatically,
and the
Welcome
screen should
appear. If it does not, click the
Start
button and choose
Run
. In
the field that appears, enter
D:\setup.exe
(if “D” is the letter of
your CD-ROM drive).
B
To install the Adapter, click the
Install
button on the
Welcome
screen.
C
After reading the License
Agreement, click
Next
.
D
Now, choose a network type.
Click the
5GHz or 2.4GHz
radio
button if you will connect to
802.11a, 802.11g and/or 802.11b
networks. Click the
5GHz only
radio button if you will connect
only to 802.11a networks. Click
the
2.4GHz only
radio button if
you will connect only to 802.11g
and/or 802.11b networks. Then,
click
Next
.
E
Choose a wireless network mode.
Click the
Infrastructure Mode
radio button if you want your
wireless computers to network with
computers on your wired network
using a wireless access point.
Click the
Ad-Hoc Mode
radio
button if you want multiple wireless
computers to network directly with
each other.
E
C
D
Set up the Dual-Band Wireless A+G
PCI Adapter
B
IMPORTANT: You must run the
Setup Wizard before inserting the
Adapter into your desktop PC.
