Wireless-B Notebook Adapter
6
Instant Wireless
®
Series
5
1. To install the PC Card, click the
Install
button on the
Welcome
screen,
Figure 4-1. Click
User Guide
to view the User Guide or click
Exit
to exit
the Setup Wizard.
2. After reading the License Agreement on the following screen, shown in
Figure 4-2, click the
Next
button to continue the installation, or click the
Cancel
button to end the installation.
3. The next screen in the Setup Wizard, shown in Figure 4-3, will ask you to
choose a wireless mode. Click the
Infrastructure Mode
radio button if you
want your wireless computers to network with computers on your wired
network using a wireless access point. Click the
Ad-Hoc Mode
radio but-
ton if you want multiple wireless computers to network directly with each
other.
Figure 4-2
Chapter 4: Using the Setup Wizard
to Configure Windows 98SE, Me,
and 2000
The Adapter’s Setup Wizard will guide you through the installation procedure
for Windows 98SE, Me, and 2000. The Setup Wizard will install the WLAN
Monitor and driver, as well as configure the PC Card.
Insert the
Setup Wizard CD-ROM
into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 4-1 should appear. If it does not,
click the
Start
button and choose
Run
. In the field that appears, enter
D:\setup.exe
(if “D” is the letter of your CD-ROM drive).
Figure 4-1
Important for Windows 98SE, Me, and 2000 users:
You must run
the Setup Wizard to install the software before installing the hardware.
Important for Windows XP users:
Do
NOT
run the Setup Wizard.
Proceed directly to “Chapter 5: Hardware Installation.”
