8
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Installation
Wireless-G PrintServer for USB 2.0
6. The
IP Settings
screen, Figure 4-5, will appear. If your network uses a router with a DHCP setting that
automatically assigns IP addresses, select
Automatically obtain an IP address (DHCP)
. If your network
uses a static IP address, select
Set IP configuration manually
, and enter the IP Address, Subnet Mask, and
Gateway in the fields provided. Click
Next
.
Click
Back
to return to the previous screen.
7. The
Set PrintServer’s Password
screen, shown in Figure 4-6 will appear. If you want to change your
password, enter your current password in the
Current Password
field. Enter the new password in the
New
Password
field, then enter it again in the
Verify Password
field. Click
Next
.
Click
Back
to return to the previous screen.
Figure 4-6: Set PrintServer’s Password
Figure 4-5: IP Settings
Static IP address:
a fixed address assigned to
a computer or device connected to a network.
