Remove the
rear case
Remove the
battery cover
Battery
button
Remove
the battery
A
B
2.
Remove the battery cover:
From the back of the
main unit, buckle the hand position B, and pull it
upwards in the direction indicated by the arrow at the
same time (depending on the strength of different users,
it may be removed after two or three times of pulling; in
order to ensure the protection level of the machine ,
it is not easy to disassemble here).
3.
Remove the battery:
Pull the battery button down to
remove the old battery.
4.
Install the battery:
Take out the battery from the
packaging box, with the battery with the notch facing
up, put the battery C at the battery compartment C, and
pull the battery button until it completely fits the
underside of the battery.
5.
Install the battery cover:
Take out the battery cover
from the packaging box, and press the battery cover
firmly along the edge of the battery compartment to
ensure that the outer surface of the battery cover is
completely inserted into the battery compartment and
flush with the edge of the battery compartment,
reaching IP67 protection level.
6.
Install the back cover:
Align the back cover with
the buckle on the back of the main unit, press your
hands along the edge of the main unit from top to
bottom (there will be a "click" sound during the process),
and ensure that there is no gap, it means that the back
cover is fastened.