Installation Guide Linear Motors
ENG
Page 14 / 30
P02-23S / P01-37S Short type
NTI AG / LinMot
4 Motor Cable
Do not connect or disconnect motor when there is power on the servo drive.
Use only original LinMot cable. Cables from other sources must be checked precisely
before commissioning.
Incorrect connections can destroy the drive and stator.
4.1 Technical Data
Three types of cables are available for linear motors. The cable attached to the stator is not a high flex cable.
For moving cable applications please use the special LinMot KS high flex (suitable for cable tracks) or KR
robot cable.
Cable type
KF02
KS03-09
K05-
04/05
KS05-
04/05
KR05-04/05
Used for
PS02-23Sx80-F
(Motor cable)
PS02-23Sx80F-
HP-K
(Motor cable)
PS01-37Sx60F-HP-N
PS01-37Sx120F-HP-N
(Motor cable/ Adapter cable)
PS02-23Sx80-F
PS02-23Sx80F-HP-K
(Motor cable / Adapter cable)
Minimum bending
radius for fixed
installation
Faltbar
25 mm
(1 in)
25 mm
(1 in)
30 mm
(1.2 in)
30 mm
(1.2 in)
Minimum bending
radius when moving
25 mm
(1 in)
50 mm
(2 in)
No Torsion
Not for moving
cable
application
60 mm
(2.4 in)
No Torsion
60mm
(2.4in)
Max. Torsion:
±270° per
0.5m
Approval
(-)
UL / CSA 300V
Cable material
according to
UL
UL / CSA
300V
UL / CSA
300V
Material
Wire insulation
Polyester
TPE
TPE-U
TPE-E
TPE-E
Material
Cable sheath
PUR
PUR
PUR
PUR
Maintain the minimum bending radius of the stator cable (see data of table).
4.2 Motor cable variants
PS02-23Sx80-F
Item
Description
Item-No.
KF02-D15/F-0.08 Flat cable, 0.08 m
0150-2150
KF02-D15/F-0.16 Flat cable, 0.16 m
0150-2156
KF02-D15/F-0.32 Flat cable, 0.32 m
0150-2152
KF02-D15/F-0.48 Flat cable, 0.48 m
0150-2154
KF02-D15/F-0.70 Flat cable, 0.70 m
0150-2158
K05-D/D15-1
Adapter cable D/D15, 1 m
0150-1936
Adapter cables for all other short motor types are available with different connectors and in different length.
Please find a list of these options in the LinMot data book on www.linmot.com. If you need a special cable,
please contact LinMot directly (see contact information on last page).
