Installation Guide Linear Motors
ENG
NTI AG / LinMot
P10-70-SSC / P10-70-SSC-D02
Page 17 / 32
5 Electrical connection
Do not connect or disconnect motor when there is power on the servo drive.
Use only double-shielded original LinMot cable. Cables from other sources must be
checked precisely before commissioning.
Incorrect connections can destroy the drive and stator.
Technical data
For the linear motors of the P10-70-SSC series, different cable types are used for power and signal supply.
All cables are high-flex cables (suitable for trailing chains) and are used for both stationary and moving
applications.
Power cable
Sensor cable
Type
KPS15-04
KSS05-02/08
KSS05-02/13
Used for
PS10-70
PS10-70-D01
PS10-70-D02
PS10-70
PS10-70-D01
PS10-70-D02
Minimum
bending radius
for fixed
installation
50 mm
(2 in)
50 mm
(2 in)
45 mm
(1.75 in)
Minimum
bending radius
when moving
100 mm
(4 in)
No torsion
100 mm
(4 in)
No torsion
90 mm
(3.54 in)
No torsion
Max. Cable
length
30 m (may be limited by Servo Drive)
Approval
UL / CSA 1000V
UL / CSA 300V
UL / CSA 30V
Wire isolation: TPE
Jacket: PUR
Wire isolation: TPE
Jacket: PUR
Wire isolation: PE
Jacket: PUR
Material
very good
very good
very good
Oil resistance
good
good
good
Chemical
resistance (to
acids, alkalis,
solvents,
hydraulic fluid)
very good
very good
very good
Outdoor
durability
flame retardant
flame retardant
flame retardant
5.1.1 Cables for stators P10-70-SSC
Item
Description
Item-No.
KPS15-04-L/Q-SSC-
Power Trailing Chain Cable L/Q-SSC-, Custom length
0150-3858
KPS15-04-B/Q-SSC-
Power Trailing Chain Cable B/Q-SSC-, Custom length
0150-3863
KSS05-02/08-D15(f)-45°/J-SSC- Encoder Trailing Chain Cable D15/J-SSC-, Custom
length
0150-3864
5.1.2 Cable for stators P10-70-SSC-D02
Item
Description
Item-No.
KPS15-04-./Qe-SSC-
Power Trailing Chain Cable …/Q-SSC-, für D0x, Custom length
0150-3865
KSS05-02/13./J-SSC-
Encoder Trailing Chain Cable .../J-SSC-, für D0x, Custom length
0150-3866
