5
SET-UP
KARIK OUTPUT CONNECTIONS
The KARIK has two stereo
AUDIO OUTPUTS
provided for connection to your preamplifier and direct connection to another
system such as a multi-room application.
The KARIK also has two high quality S/P-DIF digital audio outputs. The
ELECTRICAL OUTPUT
is connected to the NUMERIK via the 75 Ohm BNC - BNC
lead provided, or to other external audio processors with phono inputs by the use
of a BNC - Phono adaptor.
The
DIAGNOSTIC OUTPUT CONNECTOR
is used by your dealer to carry out
diagnostic checks on your KARIK to guarantee quality. He will be able to check for
tracking errors, error rates and most importantly, laser performance. This is an
extremely efficient method of service back-up, assuring you of our continued
product support.
KARIK INPUT CONNECTIONS
The KARIK’s
SYNC INPUT
connection is made
from the NUMERIK by means of a high quality audio phono - phono lead. With this
lead in place the NUMERIK adopts ‘master’ mode operation and superior audio
performance is achieved. When this lead is not in place the NUMERIK will adopt
‘slave’ mode and will operate in a conventional manner.
SLEEP MODE
If the
DISPLAY
switch on the back panel is in, and power is
applied, the KARIK will enter a ‘sleep’ mode. Twenty seconds after the last
operation the display will turn off (show two dashes). Actuation of the door,
front panel controls or remote control will waken the display. This feature, shared
by the Linn Kairn pre-amplifier and Kremlin tuner, saves power and draws less
attention to the products, if required.
When the display switch is out, and power is re-applied, the display will remain
lit continuously.
