Handset modes
For convenience, the handset has been designed to operate a
number of different types of Linn product, in order to ensure that
the number of handsets required to operate a Linn system is
minimised. The handset is therefore capable of operating in a
variety of modes:
CD mode – press SHIFT + DVD. The CD functions will then be
assigned as the primary handset keys and the ‘CD’ LED will operate
whenever one of the keys is pressed.
DVD mode – press the DVD key. The DVD functions will then be
assigned as the primary handset keys and the ‘DVD’ LED will
operate when one of the keys is pressed. (The MAJIK CD player will
also respond to DVD commands – however, see notes below).
AMP mode – press the AMP key. The preamplifier functions (printed
in blue above or below the keys themselves) will then be the
primary handset keys and both LEDs will operate when one of the
AMP keys is pressed.
SHIFT functions. Pressing SHIFT, followed (within 2 seconds) by one
of the keys with red type above it will access the function as
indicated by the red type. Note – unlike the ‘mode’ functions above,
the handset is not reassigned and SHIFT must be pressed before
each shift function is accessed.
Notes:
The handset mode and the product being controlled will determine
which keys are operational. Some keys will only operate with
specific products and may be non-functional for others. See the
Operation instructions below for details of which keys apply to the
MAJIK CD player.
The unit will respond to relevant DVD commands (e.g. Play, stop,
skip etc) as long as the ‘Accept DVD Commands’ user option is set
to ‘Yes’. It will then respond when the handset is in DVD mode as
well as CD mode. (‘Yes’ is the factory default setting). See
Setup
(user options).
ENGLISH
8
MAJIK CD
ENGLISH
