130
EN
а
b
с
To remove and clean the
fi
lter combi-
nation, turn it counter clockwise and re-
move it by lifting it upwards
(1)
.Pull the
coarse
fi
lter out of the micro
fi
lter
(2).
Then pull and remove the metal
fi
lter
(3)
. Rinse the
fi
lter with lots of water until
it is free of residue. Reassemble the
fi
l-
ters. Replace the
fi
lter insert, and rotate
it clockwise
(4)
.
• Never use your dishwasher without a
fi
lter.
• Incorrect
fi
tting of the
fi
lter will reduce
the washing e
ff
ectiveness.
• Clean
fi
lters are necessary for proper
running of the machine.
7.2 Spray arms
Make sure that the spray holes are not
clogged and that no food waste or for-
eign object is stuck to the spray arms. If
there is any clogging,remove the spray
arms and clean them under water. To re-
move the upper spray arm undo the nut
holding it in position by turning it clock-
wise and pulling it downwards. Make
sure that the nut is properly tightened
when re
fi
tting the upper spray arm.
7.3 Hose filter
Water is prevented by the inlet hose
fi
lter so as to avoid any damage to your
machine because of any contamination
(sand, clay, rust etc.) that might be
occasionally carried in through the mains
water supply or the indoor plumbing, and
to forestall such complaints as yellowing
and formation of deposits after washing.
Check the
fi
lter and the hose from time
to time and clean them if necessary. To
clean the
fi
lter,
fi
rst turn o
ff
your tap and
then remove the hose. After removing
the
fi
lter from the hose, clean it under
the tap. Insert the cleaned
fi
lter back into
its hose. Re
fi
t the hose.
7.4 Drain Pump
Large food residues or foreign objects
which were not captured by the
fi
lters
may block the waste water pump. The
rinsing water will then be above the
fi
lter.
WARNING:
Risk of cuts!
When cleaning the waste water pump,
ensure that you do not injure yourself on
pieces of broken glass or pointed imple-
ments.
