12.2 Software Installation
The CD-ROM supplied contains the following directories:
\Install
Contains the drivers required
\FirstTest
Contains a simple demo program
\Delphi
Contains sources and examples for writing your own Delphi programs
\VisualC
Contains sources and examples for writing your own C++ programs
\Labview
Contains sources and examples for writing your own LabView programs
\Manual
Contains this instruction manual
The
M50PCI
stepping motor card
is supplied with driver software for Windows
98,
Windows
2000 und Windows
XP. The drivers and instructions for installing the
M50PCI
stepping motor card
are in the
\
Install
directory on the CD-ROM supplied with this card
.
12.2.1 Windows
98
The following files are required for installation:
•LLT-Motor.inf
Control instructions for installation
•PCI9050.sys
Lowest operating system level for hardware
•PLXApi.dll
Function library for PCI bridge
The first time Windows
is booted after you have installed the
M50PCI
stepping motor card
in your PC, the following hardware assistant message will appear:
New hardware component found.
PCI bridge
Install the drivers supplied using
LLT_Motor.inf
on the CD-ROM by following the
prompts given by the hardware assistant.
Once installation has been successfully completed, you will find the entry "LLT-STEPPER
MOTOR CARD" in <
Device Manager
> of Windows
<
System Control
> under <
Other
Devices Detected
>.
If you have installed several
M50PCI
stepping motor cards, you will find this entry several
times as well
.
M50.PCI 29 40
2310
