12.2.2 Windows
2000/ Windows
XP
The following files are required for installation:
•LLT-Motor.inf
Control instructions for installation
•PCI9050.sys
Lowest operating system level for hardware
•PLXApi.dll
Function library for PCI bridge
The first time you boot the system after you have installed the
M50PCI
stepping motor card
in your PC, the operating system will recognize M50-PCI as new hardware and will show the
following message:
Other PCI bridge device found:
PCI bridge
Now follow the instructions given by the installation assistant. When the assistant prompts
you to install a new driver, enter the directory pathname under which the
LT_Motor.inf
file can be found.
Directory:\...\Install\LLT_Motor.inf
If you enter the correct directory pathname, a message will appear to inform you that an
appropriate driver was found for the "LLT-STEPPER MOTOR CARD" device.
Click on <Finish> to complete installation.
Once installation has been successfully completed, you will find the entry "LLT-STEPPER
MOTOR CARD" in <
Device Manager
> of Windows
<
System Control
> under <
Other
Devices Detected
>.
If you have installed several
M50PCI
stepping motor cards, you will find this entry several
times as well
.
If you are running Windows
XP, a message informing you that the driver
failed the "XP-Logo-Test" will appear. This message can be ignored as the
test failure will not affect the reliable operation of the
M50PCI stepping motor
card
or that of the other programs.
402310 30 M50.PCI
