12.2.3 Function Test after Installation
1. Create the directory ...
\M50
.
2. Copy the directory
\FirstTest\
on your CD-ROM to the newly created directory.
3. You can now run the
M50_Demo1.exe
program in the
\FirstTest
directory to test the
function of the
M50PCI
stepping motor card
.
The DspStatus must accept the value by showing <
function ok
> after the DSP program has
been downloaded (takes approx. 5 sec.).
The function libraries
MX_Motor.dll, CC3260MT.dll
and
STLPMT45.dll
as well as the processor program
M50DSP.IDM
are
required every time an application program is started. Therefore, it is
recommended that you copy them to the directory from which you start
the application program.
M50.PCI 31 40
2310
