24
2. Set a IF condition based on the terminal device data or
IOT-C300-4G
device status.
Condition
Description
Time
Set
the
time
condition.
The
device
time
will
be
synced
once
after joining/registering to network, you can also sync the time manually on
“Status” page.
Digital Input
When
IOT-C300-4G
device detects the DI as a specific status.
Is continued for:
the DI changed status should last for some time.
Set lockout time:
after the lockout time,
IOT-C300-4G
will detect if DI
status matches the condition. 0 means this IF condition will only be detected
once.
