21
2. Set a IF conditionbased on the terminal device data or
IOT-C300-LORA
device status.
Condition
Description
Time
Set the time condition. The device time will be synced once after
joining/registeringto network, you can also sync the time manually on “Status”
page.
Digital Input
When
IOT-C300-LORA
device detects the DI as a specific status.
Is continuedfor:
the DI changed status should last for some time.
Set lockouttime:
after the lockout time,
IOT-C300-LORA
will detect if DI status
matches the condition. 0 means this IF condition will only be detected once.
