Session Key
52613230313823
Spread Factor
Select spread factor from SF7 to SF12.
SF10-DR2
Confirmed Mode
If the sensor does not receive ACK package from
network server, it will resend data 3 times most.
Disabled
Rejoin Mode
Sensor will send specific mounts of LoRaMAC
packages to check connection status regularly. If no
reply after specific packages, the sensor will re-join.
Enabled, 8 packages
ADR Mode
Allow network server to adjust datarate of the
sensor.
Enabled
Support
Frequency
LoRaWAN region.
EU868
AU915
Channel
Enable or disable LoRa channels.
If frequency is one of CN470/AU915/US915, you can
enter the index of the channel that you want to
enable in the input box, making them separated by
commas.
Examples:
1, 40: Enabling Channel 1 and Channel 40
1-40: Enabling Channel 1 to Channel 40
1-40, 60: Enabling Channel 1 to Channel 40 and
Channel 60
All: Enabling all channels
Null: Indicates that all channels are disabled
4.2 Basic Settings
Parameters
Description
Reporting Interval
Interval of sending sensor data. Default: 10min.
Change Password
Change the password of logging Toolbox (Windows) and parameter
modify(mobile APP).
4.3 Calibration
Parameters
Description
After saving the calibration value, the sensor will add the
calibration value to raw value and send the final value.
