LinQTab LQMWP, Quick Start User Manual

Home Menu 

–

 HDMI & MHL: 

 
Select to go to the Home Menu using the Home button on the remote control or the projector. Once on the main 
menu select and click on the HDMI & MHL icon. The projector will now source signals via the HDMI connection 
from other external devices. 
 
To get connected to your laptop or desktop computer or other device using an HDMI or MHL cable please connect 
both ends of the cable and then on the Home Menu using the direction buttons on the remote or projector select 
HDMI & MHL then Click on the icon by pressing OK. 
 
Note: 
If your screen does not appear please check that the signal from the device connected to the projector is working 
and that both cable connections are secure. 
 

Home Menu 

–

 VGA: 

 
Select to go to the Home Menu using the Home button on the remote control or the projector. Once on the main 
menu select and click on the VGA icon. The projector will now source signals via the VGA connection from other 
external devices. 
 
To get connected to your laptop or desktop computer or other device using an VGA cable please connect both ends 
of the cable and then on the Home Menu using the direction buttons on the remote or projector select VGA then 
Click on the icon by pressing OK. 
 
Note: 
If your screen does not appear please check that the signal from the device connected to the projector is working 
and that both cable connections are secure.