97
7.
Up to six different motions detection windows can be created in one camera.
Figure G-3: Motion Detection Area Field
8.
<Optional>
If the motion enlarge is selected, once the alarm is trigger
為該鏡頭設定需要使用
‘Motion Enlarge
+
’
功能
,
剔選
‘Motion Enlarge’
功能旁的方格
,
調整有警報發生時
,
放大顯示鏡頭的
時間
(Display Time),
及
Switch Time
。
9.
On the right hand side of the camera display window, select the “Schedule” as the record mode.
Figure G-4: Camera Info Field
10.
Click ”Apply”
, then ”OK”
to confirm the changes.
+
The explanations of “Sensitivity”, “Differentia” and “Motion Enlarge”, please refer this user manual of
Chapter 4 – Configuration of Camera.
