23
ACCOUNT SETTINGS
The Account Settings area allows the administrator of the DVR to add users to the system. There are
two types of users, one is the Supervisor, and the other is a Normal User. The Supervisor of the DVR
system can not only make use of all the functions locally and remotely, but also has the authority to
manage normal users. A Normal User does not have supervisory powers and is limited to certain user
functionality of the DVR system. Follow these few steps to create or configure users for the DVR
system.
1.
Click the “
Setup
” Icon on the Main Screen…………………………………………………………….
2.
Click the “
Account
” Tab.
Figure 6-1: Account Tab Window
3.
Enter the name of the user followed by a specified password.
4.
Enter the password once again in the “ReType” field to reconfirm.
5.
Click the checkbox next to “Enable” to select the user's type and authority.
6.
Select “Supervisor” to give a user total control over the machine or “Normal” to limit the user's access.
7.
The “Access Permissions” must be selected following the creation of each "Normal" user.
8.
Click the checkbox next to “Local” to give the user local access to the DVR host. (Local access means
users are able to access the DVR directly.)
Chapter 6
