Linx 10V64, Quick Manual

10

Using your tablet.

Turning your tablet On

To turn your tablet on, press 

and hold

 the Power/

Sleep button and the tablet will begin to power up.

Putting your tablet into Sleep mode

To put your tablet into Sleep mode, press the Power/
Sleep button once. The screen should switch off and 
your tablet will be in Sleep mode.

To wake the tablet from Sleep mode, press the 
Power/Sleep button once. The screen should wake 
up and display the lock-screen.

Turning your tablet Off

To turn your tablet off, press 

and hold

 the Power/

Sleep button until you are prompted with the ‘Slide 
to shut down your PC’ message. Slide and drag 
your finger down the screen to begin the shut down 
process and turn off your tablet.

Emergency reboot

To reboot your tablet if the screen becomes 
unresponsive, press 

and hold

 the Power/Sleep 

button for approx. 10 seconds until the screen turns 
off.

Note: 

Leave the tablet for 15 seconds before trying 

to reboot the tablet.

 Important: 

Avoid powering the tablet down 

by using the emergency reboot wherever possible. 
Always try to shut down your tablet using the correct 
shut down method to avoid loss or damage to data.

Increasing and decreasing the volume

To increase the volume level on your device, press 
the Volume up button. Repeatedly press the Volume 
up button until the desired volume is reached.

To decrease the volume level on your device, press 
the Volume down button. Repeatedly press the 

Volume down button until the desired volume is 
reached.

Using headphones with your tablet

You can connect headphones with a 3.5mm plug 
(not included) to your tablet. The headphone socket 
can be found on the device highlighted with  . 
When you have headphones connected, the tablet 
speakers are switched off and all sound is sent via 
the headphones.

Installing a Micro SDHC/XC card

Your tablet supports Micro SDHC and SDXC cards 
(not included) for additional storage of data and files.

 Important: 

Use only compatible memory cards 

approved for use with this device. Incompatible cards 
may damage both the memory card and the tablet  
and may corrupt data stored on the card.
To install a Micro SDHC/SDXC memory card:

1. Locate the Micro SDHC/SDXC card slot on the 
tablet.
2. Insert the Micro SDHC/SDXC card into the slot, 
carefully slide the memory card into the slot, pushing 
gently until it clicks into place.

Note: 

To remove a memory card, push the memory 

card gently until it clicks and the spring will push the 
card out to allow you to remove it from the tablet.

 Important: 

Do not remove a memory card 

when files are currently being used by the tablet. This 
may corrupt or lose the data stored on the memory 
card.