Misty Electronic Blindmask
User’s Manual
Version 1.2 | 19/04/19
Page 12
Inspection and maintenance
To ensure trouble-free training sessions, we recommended that you regularly carry out the following
checks, preferably before every training session:
•
Inspect the system for damage to the casing or cables. Do not use the system if the cables are
damaged or if the casing is damaged to such an extent that one can suspect that the system will
not function properly or that it will pose a safety risk to the student or instructor. In that case,
contact LION Protects B.V., and have the system repaired.
•
Check the proper functioning of the system. Switch on both Student Units, and check to make
sure that they work properly together with the Instructor Unit. Check the panic buttons on both
Student Units to make sure they function properly, as this option can be very important!
•
If necessary, clean the equipment with a moist cloth (using a mild all-purpose household
cleaning agent if necessary). The casing is not resistant to chemicals such as alcohol, thinner or
acetone.
•
NEVER
clean the system using a washing machine / drier (for example of the type used for face
masks). This will permanently damage the system, and such damage is not covered by the
product guarantee!
•
Make sure that the system is adequately charged when starting a training exercise. An empty
battery can cause unwelcome training interruptions.
•
The usable lifetime of the batteries is limited. On average, a NiMH battery will last for several
years. If the length of time that one can work with the unit on a fully charged battery diminishes
noticeably, then we recommend that you replace the batteries. In order to get maximum benefit
from the system, we recommend that you replace all the batteries together at the same time. The
batteries will also last longer if you use the system regularly and regularly recharge the batteries.
If the system is not used for a period of one month or longer, you should completely charge the
set before using it.
