Lionel 1563W Wabash Freight Set Owner'S Manual Download | Manualshive

Page: 2 / 24

background image

2

C

ongratulations on your purchase of the #1563W Wabash Freight Set! The Wabash F-3 A-
unit is powered by dual Pullmor motors with the Magne-Traction track gripping system.

The TrainMaster Command Control system and the RailSounds sound system bring even more
excitement to this classic set. The #6357 caboose is the first of its type offered with a metal
frame and ends since the original issue. The #3620 Searchlight Car includes remote control
operation. Adjust the searchlight’s brightness level and how fast or slow the light rotates via a
Remote Control Track section (sold separately). The set also includes a #6467 flatcar, a
#3562-50 barrel car, and a #6414 Evans auto loader.

Congratulations!

Wabash Freight Set features

• Wabash F-3 powered A-unit
• Wabash F-3 non-powered B-unit
• #6467 flatcar with stakes and

bulkheads

• #3562-50 operating barrel car

• #3620 die-cast metal operating

searchlight car

• #6414 Evans auto loader
• #6357 caboose

Rolling stock features

• #6467 flatcar includes durable

bulkheads and metal stakes

• #3562-50 operating barrel car

features a metal barrel channel and
six wooden barrels

• #3620 operating searchlight car

features a die-cast metal body and
remote control operation to adjust
brightness level and rate of rotation

• #6414 Evans auto loader features

metal superstructure and four durable
cars

• #6357 caboose features interior

lighting with metal frame and ends

Powered and non-powered locomotive features

• TrainMaster Command Control

equipped—able to run in Command
Control mode or in conventional
transformer control mode

• RailSounds sound system with

CrewTalk communication and
TowerCom announcements in
non-powered B-unit

• Directional lighting including

operating headlight on powered A-unit
and operating back-up light on non-
powered B-unit

• Front ElectroCoupler on powered

A-unit and rear ElectroCoupler on non-
powered B-unit

• Dual powerful Pullmor motors in

powered A-unit

• Magne-Traction track gripping system

on powered A-unit

• Four traction tires on powered A-unit
• Durable painted bodies
• Lighted cab interior in powered A-unit

«
1
2
3
4
...
»

Summary of Contents for 1563W Wabash Freight Set

























Reviews:

No comments

Related manuals for 1563W Wabash Freight Set

Lancaster B Mk.II bomb bay

Brand: Eduard Pages: 2

Bbaby Mini Woofer BX1986

Brand: Maison Battat Pages: 2

Premier Swiss 6/8 Type II Crocodile Electric Engine

Brand: M.T.H. Pages: 107

Tiger Moth V2.0

Brand: Dancing Wings Hobby Pages: 6

Brand: Propel RC Pages: 4

Taylorcraft 130

Brand: Ares Pages: 32

Brand: MD Helicopters Pages: 2144

Patrol Truck 1070

Brand: Laser Pegs Pages: 2

Brand: BrainCube Aeromodels Pages: 27

Brand: E-FLITE Pages: 20

Brand: Kavan Pages: 16

Brand: Little Tikes Pages: 4

BLINDFOLDED MUSICAL CHAIRS

Brand: Hasbro Gaming Pages: 2

Poopsie Sparkly Critters

Brand: MGA Entertainment Pages: 2

NH92022 CESSNA SKYHAWK

Brand: NINCOAIR Pages: 14

Mini HIGHroller

Brand: Team Losi Pages: 20

little tikes Pillow Racers BEE

Brand: MGA Entertainment Pages: 2

GOBLIN KRAKEN NITRO 580

Brand: SAB Heli Division Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands