Notes on the RailSounds sound system
• Use the volume control knob to adjust sound output. Refer to Figure 4 on page 9 or
Figure 5 on page 10. Use a flat-blade screwdriver to adjust the volume level.
Do not force the volume control knob past the point where it will easily turn, or
damage to the volume control will result.
• Listen for incidental locomotive sounds during the operation of the RailSounds sound
system. They’re automatic and, of course, authentic.
• The nine-volt alkaline battery you installed ensures
continuous
sounds, even during short
track-power interruptions. The battery must be installed for the shutdown sequence.
• Longer track-power interruptions (including locomotive derailments) cause the
RailSounds sound system to shut down after about seven seconds.
• For even
more
authentic RailSounds sound system effects, operate your locomotive in the
TrainMaster Command Control environment. See pages 17-22 for details.
• If you adjust the volume using your CAB-1 Remote Controller in the TrainMaster
Command Control environment, the volume settings will be saved and restored after
shutdown. To reset the volume, press
AUX1,0
to reset the locomotive.
RailSounds sound system operations
14
Caution!
