background image

20

©2015 L

IONEL

 L.L.C., C

ONCORD

, NC 28027

U

NITED

 S

TATES OF 

A

MERICA

P

RINTED IN 

C

HINA

Lionel Limited Warranty Policy & Service

T

his Lionel product, including all mechanical and electrical components, moving parts, motors and structural components, with the 

exception of 

Lamps, LED’s, Traction Tires and smoke unit batting

 are warranted to the original owner/purchaser for a period of 

ONE YEAR from date of Purchase

 against defects in materials or workmanship.

This warranty does 

NOT

 cover the following:

• Normal wear and tear

• Defects appearing in the course of commercial use

• Damage resulting from abuse / misuse of the products
     Modification to this product in any way; visually, mechanically or electrically and / or evidence of any attempt of consumer repair voids the 

warranty in its entirety. 
     Any warranted item which is found to be defective in original materials or workmanship and is delivered by the 

original owner/

purchaser

 to Lionel LLC or a Factory Trained Authorized Service Station 

MUST

 be accompanied by the original receipt or gift receipt from 

the original place of purchase

. The product will be repaired or replaced 

without charge

 for parts or labor. In the event the defective 

item cannot be repaired and a suitable replacement is not available, Lionel will offer to replace the product with a comparable model 

(at the 

discretion of Lionel LLC)

, if available. 

T

o obtain service please contact Lionel Customer Services at 586-949-4100 option 2 Monday through Friday 9am to 5pm EDT. You can 

also contact us online at: TalkToUs@Lionel.com Having the product accessible during the call will help expedite the service process. Our 

Customer Service Representatives are required to walk you through some simple troubleshooting steps to help identify / resolve the problem with 

your specific product. In the event a product, sent in for repair, is found to be in proper working order a handling fee of $50.00 will be charged 

to the customer.  

     If it is deemed your product must be sent to Lionel LLC for repair you will be assigned a Return Authorization Number to 

identify and track your repair. Please, under no circumstances, send a product to Lionel LLC without a Return Authorization 

Number. Items received without a Return Authorization Number will be refused for delivery. The Return Authorization Number 

must be clearly printed on the outer shipping carton.

S

ome states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. 

This warranty gives you specific legal right and you may have other rights which vary from state to state.

P

lease complete the information below and keep it, along with a copy of the original DATED sales receipt. The sales receipt must be presented 

when requesting warranty service. 

In no event shall Lionel LLC be held responsible for incidental or consequential damages.

Instructions for Obtaining Service

Warranty Information

Name _________________________________________________________________________
Address ________________________________________________________________________
City, State, Zip ________________________________________________________________          
Daytime Phone Number (________)____________________________________________________
Email address __________________________________________________________________     
Product Number (example: 6-30208) _____________________________________________________
Product Name (Name on the Set Box) _____________________________________________________
Place of Purchase _____________________________________________________ 

                      

Date of Purchase _____________________________________________________ 

                      

Lionel Customer Services

6000 Victory Lane 

Concord, NC 28027.

Summary of Contents for LionChief Plus





















Reviews: