7
The LionChief Plus remote
Operating your locomotive set with your LionChief remote
ON/OFF SWITCH
To conserve your batteries,
move the On/Off switch to the
Off position when you are
done operating your train.
SPEED INDICATOR LIGHT
The red light will remain on during
normal operation. The light will begin
to flash when the locomotive is in
motion, and the flashing will vary with
the
locomotive's speed.
BELL
The BELL button will acti-
vate the bell sounds on
locomotives equipped with
this feature. Press the
BELL button to begin the
sounds; press the button
again to turn off the bell.
Press
two times within
ONE second to
trigger the
ElectroCoupler on
the front pilot.
HORN
The HORN button will activate
your locomotive’s horn. Press two
times within ONE second to
trigger the ElectroCoupler on the
rear pilot.
COUPLER
The COUPLER button will activate
your locomotive’s couplers. Press two
times within ONE second to trigger the
ElectroCoupler on the rear pilot. Press
once to trigger the front coupler.
ANNOUNCEMENTS
Press the center button for a variety of
announcements. See page 10 for more
information.
THROTTLE
Turn the throttle knob clockwise to go
forward and adjust the speed. Turn the
throttle knob counter-clockwise to go
reverse and adjust the speed. To stop the
train, simply return the throttle knob to
the center position.
Summary of Contents for LionChief Plus
Page 19: ...19 Notes ...