Track layout
6
Attaching the lockon to the track
T
he lockon connects power from your
controller to the track. Attaching
the lockon to the track is quick and
easy. First, place the lockon
under any straight section of
track. Fit the center lip
of the lockon onto
the edge of an
outside rail. Press the lockon upward so that
the spring contact snaps onto the center
rail. The lockon should face outward
when setting up your track and
make sure it is firmly connect-
ed. Use the illustrations below as
a step-by-step guide.
Once the lockon is securely attached to
the track, it’s time to insert the wires from
the controller into the two spring clips on
the lockon. See page 7 for easy-to-follow
steps.
2
1
LIONEL
CTC
LO
CKON
2
Snap spring contact
to the middle rail
1
Hook lip to the
outside of the rail
