Running your train
13
Sounding your locomotive’s horn
1 2
POWER
SUPPLY
Existing wire
Red wire
Black wire
Lionel no. 610-5906-001
Sound Activation Button for
activating the horn
The no. 610-5906-001 button works with any Lionel AC transformer except
no. 6-4690 Type MW.
P
ress the HORN/WHISTLE button on your controller to sound the locomotive's horn. Be
sure that the horn ON/OFF switch is in the ON position. Refer to Figure 7 on
page 12 for the location of that switch.
If your controller does not have a HORN/WHISTLE button, install a Lionel Sound
Activation Button (available separately, part no. 610-5906-001). Connect the button as shown
in Figure 8.
If you would like to disable the horn sounds, throw the horn ON/OFF switch to the OFF
position.
All track power must feed through the Sound Activation Button. Do not bypass the button.
Common/Ground/U
Power/A
Figure 8. Sound Activation Button wiring
Note!
Note!